JIS 10K BALL VALVE

Product introduction:

JIS 10K ball valve is made of high quality and durable materials. Various ball valves are specially designed for different industries and applications, including construction and civil engineering, shipbuilding, transportation and electronics. We provide ball valves of different sizes, from small size to large size, from flange type to flange type. Our 10K ball valve is made of JIS 10K steel and has linear and angular displacement adjustment functions. This can be used to control the flow or to stop the flow completely. Our ball valves are patented worldwide, and their easy to operate design makes them suitable for various industries.

The main components of JIS 10K ball valve are made of high-quality alloy steel and undergo heat treatment to achieve maximum strength. The gate (plug) is made of carbon steel or stainless steel, and then internally equipped with corrosion-resistant surface treatment. Both ends of the gate (plug) have pressure sealing surfaces, which are made of hardened material and can withstand 18000 psi without deformation. The high-quality JIS 10K ball valve is made of materials (such as steel, cast iron, brass and bronze alloy) that meet the requirements of this standard. JIS 10K ball valve has a variety of end connections, sealing arrangements and pressure ratings, which can meet most requirements.

Product advantages:

JIS 10K ball valve is made of steel and stainless steel, with long service life and no regular maintenance. Because it is made of stainless steel, it can maintain its performance in various corrosive environments. In addition, it also has excellent sealing performance, smooth operation, no solder joint design and PTFE sealing seat function.

1. it is made of high-quality steel materials. 2. the product meets the highest international standards and meets all your requirements for performance, reliability, durability and safety. 3. environmental protection and energy saving 4 The energy saving rate is as high as 80%. 5. each valve has low cost and saves production cost

The pressure difference between the open and closed positions of JIS 10K ball valve is lower than that of any flange or quick closing butterfly valve. The combination of these features makes it an ideal product that must be closed quickly, accurately and reliably. It has a service life of thousands of times and can handle a wide variety of applications.

Product design:

JIS 10K ball valve is an all welded, butt welded or reinforced gate valve with bolted bonnet and spool assembly. The valve body has a sweat free polished inner hole surface. Due to the integrated forging design, there is no sharp edge. The sphere is precisely ground after welding to ensure that the cover will not be worn during use.

The main function of ball valve is to control the on / off of liquid or gas flow. It works by allowing the flow of water from one place to another when in the open position and by completely closing the flow when closed. There are many types of ball valves, but they all follow the same basic design. A ball is freely seated in a socket that forms part of the valve body. The ball moves from one place to another by rotating the top handle, opening and closing the openings around it. When it is opened, it allows fluid, liquid and gas to pass smoothly, but because it can only flow in one direction, there can be no reflux; When closed, it completely cuts off this flow. "

JIS 10K STAINLESS STEEL 2-PC FLANGE BALL VALVE Features:

• Full Bore
• JIS 10K Flange connection
• Size: 1/2” to 6” (DN15-150)
• Working Pressure: 10kg/cm2
• Valve Body Material: Stainless Steel SS316
• Fire-Safe Design According to API 607
• Applicable Medium: General oil, Gas & Water applications
• Blow-out Proof Stem Design
• Temperature Range: -29°C to 150°C

  Main Parts and Materials

  No	PAPT NAME	MATERIAL
  1		Screw						SM35C			304
  2		Washer						SS400			304
  3		Handle						SCPH2
  4		Retaining ring						SUP6			304
  5		Orientation patch						SS400			304
  6		Screw						SM35C			304
  7		Gland						SCPH2			SCS13
  8		Packing						PTFE
  9		Thrust Gasket						PTFE
  10		Stem						304			304/316
  11		Gasket						PTFE
  12		Bonnet						SCPH2			SCS13/SCS14
  13		Nut						SM35C			304
  14		Stud						SM45C			304
  15		Ball						304			304/316
  16		Body						SCPH2			SCS13/SCS14
  17		Seat						PTFE
  NPS	D1		d	K	D	C	f		N-∅Z	L		H	E
  15A	15		51	70	95	14	1		4-15	140		79	120
  20A	20		56	75	100	16	1		4-15	152		82	120
  25A	25		67	90	125	16	1		4-19	165		109	150
  32A	32		76	100	135	18	2		4-19	178		113	150
  40A	38		81	105	140	18	2		4-19	190		143	230
  50A	50		96	120	155	16	2		4-19	178		135	240
  65A	65		116	140	175	18	2		4-19	190		145	280
  80A	78		126	150	185	18	2		8-19	203		160	320
  100A	98		151	175	210	18	2		8-19	229		180	320
  125A	123		182	210	250	20	2		8-23	356		252	530
  150A	148		212	240	280	22	2		8-23	394		285	630
  200A	198		262	290	330	22	2		12-23	457		385	800
  250A	248		324	355	400	24	2		12-25	53		485	Turbine
  300A	298		368	400	445	24	3		16-25	610		545
  350A	348		413	445	490	26	3		16-25	686		635

  Main Part and Materials

  No	PAPT NAME	MATERAIL
  1	Screw	B7	304
  2	Washer	1020	304
  3	Handle	WCB
  4	Retaining ring	65Mn	304
  5	Orientation patch	1020	304
  6	Screw	B7	304
  7	Gland	WCB	CF8
  8	Packing	PTFE
  9	Thrust Gasket	PTFE
  10	Stem	304	304/316
  11	Gasket	PTFE
  12	Bonnet	WCB	CF8/CF8M
  13	Nut	2H	304
  14	Stud	B7	304
  15	Ball	304	304/316
  16	Body	WCB	CF8/CF8M
  17	Seat	PTFE

  Main External and Connecting Dimensions

  NPS	D1	d	K	D	C	f	N-∅Z	L	H	E
  1/2	15	34.9	60.3	90	2	10.0	4-16	108	79	125
  3/4	20	42.9	69.9	100	2	10.9	4-16	117	82	125
  1	25	50.8	79.4	110	2	11.6	4-16	127	102	155
  1 1/4	32	63.5	88.9	115	2	13.2	4-16	140	106	155
  1 1/2	38	73.0	98.4	125	2	14.7	4-16	165	128	240
  2	50	92.1	120.7	150	2	16.3	4-19	178	135	240
  2 1/2	65	104.8	139.7	180	2	17.9	4-19	190	145	280
  3	78	127.0	152.4	190	2	19.5	4-19	203	160	320
  4	98	157.2	190.5	230	2	24.3	8-19	229	180	320
  5	123	185.7	215.9	255	2	24.3	8-22	356	252	530
  6	148	215.9	241.3	280	2	25.9	8-22	394	285	630
  8	198	269.9	298.5	345	2	29.0	8-22	457	385	800
  10	248	323.8	362.0	405	2	30.6	12-25	533	485	Turbine
  12	298	381.0	431.8	485	2	32.2	12-25	610	545
  14	348	412.8	476.3	535	2	35.4	12-29	686	635

  KS FLANGE BALL VALVE

  Applicable Standards

  1. Design Rating : KS B2308
  2. Face to Face : KS B2308
  3. Flanged Ends : KS B1511
  4. Inspection & Testing : KS B2308

  Main Parts and Materials

  No	PAPT NAME	MATERIAL
  1	Screw	SM25C	STS304
  2	Washer	SS400	STS304
  3	Handle	SCPH2
  4	Retaining ring	SPS3	STS304
  5	Orientation patch	SS400	STS304
  6	Screw	SM25C	STS304
  7	Gland	SCPH2	SSC13
  8	Packing	PTFE
  9	Thrust Gasket	PTFE
  10	STEM	STS304	STS304/316
  11	Gasket	PTFE
  12	Bonnet	SCPH2	SSC13/SSC14
  13	Nut	SM35C	STS304
  14	Stud	SM45C	STS304
  15	Stud	SM45C	STS304/316
  16	Body	SCPH2	SSC13/SSC14
  17	Seat	PTFE

  Main External and Connecting Dimensions

  NPS	D1	d	K	D	C	f	N-∅Z	L	H	E
  15A	15	51	70	95	12	1	4-15	108	79	125
  20A	20	56	75	100	14	1	4-15	117	82	125
  25A	25	67	90	125	14	1	4-19	127	102	155
  32A	32	76	100	135	16	2	4-19	140	106	155
  40A	40	81	105	140	16	2	4-19	165	128	240
  50A	50	96	120	155	16	2	4-19	178	135	240
  65A	65	116	140	175	18	2	4-19	190	145	280
  80A	78	126	150	185	18	2	8-19	203	160	320
  100A	98	151	175	210	18	2	8-19	229	180	320
  125A	123	182	210	250	20	2	8-23	356	252	530
  150A	148	212	240	280	22	2	8-23	394	285	630
  200A	198	262	290	330	22	2	12-23	457	385	800
  250A	248	324	355	400	24	2	12-25	533	485	Turbine
  300A	298	368	400	445	24	3	16-25	610	545